Announcement

Collapse
No announcement yet.

mega... help this kid out

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mega... help this kid out

    you've got a shop, right? why not gear up to make this?



    see... not all you fellow countrymen are morons.

  • #2
    Re: mega... help this kid out

    Originally posted by metalman View Post
    you've got a shop, right? why not gear up to make this?



    see... not all you fellow countrymen are morons.
    Anybody figure out how it's driven? No chain/sprockets, no driveshaft that I could see? That leaves magnets or mirrors...

    ...or Mega's favourite energy source - noucleer - :eek:

    Comment


    • #3
      Re: mega... help this kid out

      Originally posted by GRG55 View Post
      Anybody figure out how it's driven? No chain/sprockets, no driveshaft that I could see? That leaves magnets or mirrors...

      ...or Mega's favourite energy source - noucleer - :eek:
      Did you see the fellow pedal at any time?

      Hmmmmmm.
      If necessity is the mother of invention, desperation is the father...

      Comment


      • #4
        Re: mega... help this kid out

        This is a good example of a "Push Bike" From the Wiki

        The documented ancestors of today's modern bicycle were known as push bikes (still called push bikes outside of North America), draisines, or hobby horses. Being the first human means of transport to make use of the two-wheeler principle, the draisine (or Laufmaschine, "running machine"), invented by the German Baron Karl von Drais, is regarded as the forerunner of the modern bicycle (and motorcycle). It was introduced by Drais to the public in Mannheim in summer 1817 and in Paris in 1818.[3] Its rider sat astride a wooden frame supported by two in-line wheels and pushed the vehicle along with his/her feet while steering the front wheel.

        Comment


        • #5
          Re: mega... help this kid out

          Originally posted by Rajiv View Post
          This is a good example of a "Push Bike" From the Wiki
          Well that makes the cross-drilled front and rear disc brakes a bit ridiculous, doesn't it...

          Comment


          • #6
            Re: mega... help this kid out

            I have the skills & contacts, some folding, CNC manchining a few Laser cut parts..........whats the deal?
            Mike

            Comment


            • #7
              Re: mega... help this kid out

              Originally posted by GRG55 View Post
              Anybody figure out how it's driven? No chain/sprockets, no driveshaft that I could see? That leaves magnets or mirrors...

              ...or Mega's favourite energy source - noucleer - :eek:
              oh... you wanted a bike that folds into its 26'' wheel size that you can actually use? well, well. aren't we picky!

              Comment


              • #8
                Re: mega... help this kid out

                Originally posted by GRG55 View Post
                Well that makes the cross-drilled front and rear disc brakes a bit ridiculous, doesn't it...
                Not when you are going down hill! On regular bikes, that is when you need it the most

                Comment

                Working...
                X